BQRBY - 68-SX-87 EPOXY REPAIR, 06887

  • MSDS: BQRBY
  • Manufacturer: SELIG CHEMICAL INDUSTRIES
  • Product Name: 68-SX-87 EPOXY REPAIR, 06887
  • National Stock Number: 8040-00N036528
Product Identification

Product ID:68-SX-87 EPOXY REPAIR, 06887
MSDS Date:07/29/1988
FSC:8040
NIIN:00N036528
MSDS Number: BQRBY

Responsible Party
SELIG CHEMICAL INDUSTRIES
840 SELIG DR SW
ATLANTA, GA 30378
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 404-691-9220

Cage: 86938

Contractor
SELIG CHEMICAL INDUS, DIV OF NATIONAL SERVICE INDUS
ATLANTA, GA 30378 US

Telephone: 404-691-9220

Cage: 86938

Ingredients

PHENOL, 2,4,6-TRIS(DIMETHYLAMINO METHYL)

CAS: 90-72-2

RTECS: SN3500000

Fraction By Weight: 1.5%


EPOXY RESIN (DIGLYCIDYL ETHER OF BISPHENOL A)

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 15%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYE:POSSIBLE SENISITIZER AND
IRRITANT. INGEST:CAN CAUSE NAUSEA AND VOMITING. INHAL:NONE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN:WASH WITH SOAP & WATER. EYE:FLUSH IMMEDIATELY WITH
PLENTY OF WATER FOR AT LEAST 15 MINUTES. CALL MD. INHAL:MOVE TO
FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF RESP) . INGEST:RINSE
MOUTH AND GIVE PLENTY OF WATER TO DRINK. INDUCE VOMITING. GET MD
IMMEDIATELY.

Fire Fighting

Flash Point Method:TCC
Flash Point:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CO, ALDEHYDES, ACIDS, OXIDES OF SILICON
AND NITROGEN MAY BE FORMED.

Accidental Release

Spill Release Procedures:DISPOSE OF IN A NORMAL MANNNER. NOT A
POTENTIAL POLLUTANT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:HARMFUL IF SWALLOWED. AOVID EYE
CONTACT AND EXCESSIVE SKIN CONACT.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

Exposure Controls

Respiratory Protection:NOT REQUIRED. NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:ONLY IF HEATED ABOVE 100F (LOCAL).
Protective Gloves:POLYETHYLENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Vapor Pres:NIL
Spec Gravity:1.9
Evaporation Rate & Reference:NIL
Solubility in Water:NIL
Appearance and Odor:PUTTY LIKE, MERCAPTAN ODOR
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, ALDEHYDES, AICDS, OXIDES OF
SILICON AND NITROGEN.

Disposal

Waste Disposal Methods:INCINERATE IN FURNACE OR BURY IN LANDFILL
ACCORDING TO APPLICABLE REGULATIONS. DISPOSE IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.